Differences between revisions 1 and 32 (spanning 31 versions)

NFS HOWTO

I have put this HOWTO together from various sources which I will list at the end. Discuss here is the process of setting up a server and using a client. I'm not going to get very wordy here as this is really a reference for myself. However, if you want to contact me concerning this document, follow the link at the bottom of this page for my contact info.

Getting the Packages

On Debian derived systems you can install the server packages as shown below:

sudo apt-get install nfs-kernel-server nfs-common portmap

Configuring portmap

Do not bind portmap to the loopback. If you need to reconfigure the portmap run the first of the next two commands or edit /etc/default/portmap by hand then restart the servers.

sudo dpkg-reconfigure portmap
sudo /etc/init.d/portmap restart

Configuring NFS

Edit the /etc/exports file.

The following line will permit all 254 C class addresses on the private net specified to access this mount.

/home 192.168.1.0/24(rw,no_root_squash,no_subtree_check,async,insecure)

This line will permit all 65534 C class addresses on the private net specified to access this mount.

/home 192.168.0.0/16(rw,no_root_squash,no_subtree_check,async,insecure)

You must execute the following commands after any edit to the /etc/exports file.

Reread the /etc/export file.

sudo exportfs -ra

Restart the nfs server.

sudo /etc/init.d/nfs-kernel-server restart

Note: See ipcalc for details of determining the network parameters.

TCP Wrappers

In the /etc/hosts.deny file deny everything.

ALL:    ALL: \
spawn ( DATE=`date`; /bin/echo $DATE %d %u %c >> /var/log/wrapper-deny.log )

In the /etc/hosts.allow file add portmap, mountd, nfsd, lockd, rquotad, statd.

ALL: 127.0.0.1

portmap, mountd, nfsd, lockd, rquotad, statd, sshd, cvs : \
127.0.0.1, \
some.domain.org, \
some.domain.net : \
spawn ( DATE=`date`; /bin/echo $DATE %d %u %c >> /var/log/wrapper-allow.log )

Installing Just the Client Software

sudo apt-get install portmap nfs-common

Manual Mounting

First make a mount point on your remote machine where you want the server mount to be located.

cd /
sudo mkdir -p /exports/host/home

The following will mount your remote /home directory to /export/host/home on the client machine.

sudo mount -t nfs host.mydomain.org:/home /export/host/home

You may not need the -t nfs in the above command.

You will need to restart the servers using the commands below:

sudo /etc/init.d/portmap restart
sudo /etc/init.d/nfs-common restart

Auto Mounting

Install the autofs package:

sudo apt-get install autofs

Edit the /etc/auto.master file adding the following line.

/.autofs/host  /etc/auto.host  --timeout=60

Create the /etc/auto.host file and add the lines for your mounts.

someuser -rw,soft,bg,intr  host.mydomain.org:/home/someuser
iso      -rw,soft,bg,intr  host.mydomain.org:/extra0/iso
Video    -rw,soft,bg,intr  host.mydomain.org:/extra1/Video

I make a hidden directory path at the root system named /.autofs/host where host is the host name of the machine I am mounting shares from.

sudo mkdir -p /.autofs/host

Boot Mounting

Edit /etc/fstab adding the following line:

host.mydomain.org:/home /export/host/home nfs rw,bg,intr 0 0

Look at the nfs manual page for other mounting options.

To test your edit type in a terminal the following command:

mount /export/host/home

Useful Links

http://ubuntuforums.org/showthread.php?t=249889

http://tldp.org/HOWTO/NFS-HOWTO/

https://help.ubuntu.com/community/SettingUpNFSHowTo

http://www.linux-consulting.com/Amd_AutoFS/autofs-5.html

-  ⇤ ← Revision 1 as of 2008-08-14 00:14:48 → 
  Size: 216
  Editor: CarlNobile
  Comment:
+   ← Revision 32 as of 2009-09-14 18:39:42 → ⇥
  Size: 4041
  Editor: CarlNobile
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 3:
-I have put this HOWTO together from various sources which I will list at the end. I will discuss the process of setting up a server and using a client.
+I have put this HOWTO together from various sources which I will list at the end. Discuss here is the process of setting up a server and using a client. I'm not going to get very wordy here as this is really a reference for myself. However, if you want to contact me concerning this document, follow the link at the bottom of this page for my contact info.
 Line 5:
-On Debian type systems you can istall the
+== Getting the Packages ==

On Debian derived systems you can install the server packages as shown below:

{{{
sudo apt-get install nfs-kernel-server nfs-common portmap
}}}

== Configuring portmap ==

'''Do not bind portmap to the loopback. If you need to reconfigure the portmap run the first of the next two commands or edit {{{/etc/default/portmap}}} by hand then restart the servers.'''

{{{
sudo dpkg-reconfigure portmap
sudo /etc/init.d/portmap restart
}}}

== Configuring NFS ==

Edit the {{{/etc/exports}}} file.

The following line will permit all 254 C class addresses on the private net specified to access this mount.

{{{
/home 192.168.1.0/24(rw,no_root_squash,no_subtree_check,async,insecure)
}}}

This line will permit all 65534 C class addresses on the private net specified to access this mount.

{{{
/home 192.168.0.0/16(rw,no_root_squash,no_subtree_check,async,insecure)
}}}

You must execute the following commands after any edit to the {{{/etc/exports}}} file.

Reread the {{{/etc/export}}} file.

{{{
sudo exportfs -ra
}}}

Restart the nfs server.

{{{
sudo /etc/init.d/nfs-kernel-server restart
}}}

'''Note: See [[ipcalc]] for details of determining the network parameters.'''

== TCP Wrappers ==

In the {{{/etc/hosts.deny}}} file deny everything.

{{{
ALL:    ALL: \
spawn ( DATE=`date`; /bin/echo $DATE %d %u %c >> /var/log/wrapper-deny.log )
}}}

In the {{{/etc/hosts.allow}}} file add {{{portmap, mountd, nfsd, lockd, rquotad, statd}}}.

{{{
ALL: 127.0.0.1

portmap, mountd, nfsd, lockd, rquotad, statd, sshd, cvs : \
127.0.0.1, \
some.domain.org, \
some.domain.net : \
spawn ( DATE=`date`; /bin/echo $DATE %d %u %c >> /var/log/wrapper-allow.log )
}}}

== Installing Just the Client Software ==

{{{
sudo apt-get install portmap nfs-common
}}}

== Manual Mounting ==

First make a mount point on your remote machine where you want the server mount to be located.

{{{
cd /
sudo mkdir -p /exports/host/home
}}}

The following will mount your remote {{{/home}}} directory to {{{/export/host/home}}} on the client machine.

{{{
sudo mount -t nfs host.mydomain.org:/home /export/host/home
}}}

You may not need the {{{-t nfs}}} in the above command.

'''You will need to restart the servers using the commands below:'''

{{{
sudo /etc/init.d/portmap restart
sudo /etc/init.d/nfs-common restart
}}}

== Auto Mounting ==

Install the autofs package:

{{{
sudo apt-get install autofs
}}}

Edit the {{{/etc/auto.master}}} file adding the following line.

{{{
/.autofs/host  /etc/auto.host  --timeout=60
}}}

Create the {{{/etc/auto.host}}} file and add the lines for your mounts.

{{{
someuser -rw,soft,bg,intr  host.mydomain.org:/home/someuser
iso      -rw,soft,bg,intr  host.mydomain.org:/extra0/iso
Video    -rw,soft,bg,intr  host.mydomain.org:/extra1/Video
}}}

I make a hidden directory path at the root system named {{{/.autofs/host}}} where host is the host name of the machine I am mounting shares from.

{{{
sudo mkdir -p /.autofs/host
}}}

== Boot Mounting ==

Edit {{{/etc/fstab}}} adding the following line:

{{{
host.mydomain.org:/home /export/host/home nfs rw,bg,intr 0 0
}}}

Look at the [[http://linux.die.net/man/5/nfs|nfs manual page]] for other mounting options.

To test your edit type in a terminal the following command:

{{{
mount /export/host/home
}}}

== Useful Links ==

http://ubuntuforums.org/showthread.php?t=249889

http://tldp.org/HOWTO/NFS-HOWTO/

https://help.ubuntu.com/community/SettingUpNFSHowTo

http://www.linux-consulting.com/Amd_AutoFS/autofs-5.html

Diff for "NFS HOWTO"